Vehicles or people can gain entry to the interior of the enclosed area through double gates in many designs. Double gates are intended to allow entry of people and vehicles taking into consideration the fence design, real estate design and costumer’s wishes. With manual or automatic opening they are comfortable, safe, and reliable.
Public areas and parks
Schools and kindergartens
The single gate construction consists of side bearing pillars and a gate wing. The gate wing is assembled using a support frame and filler, which complements the rest of the fence. Fillers can be wire panel 3D, 2D, perforated sheets, lamellas, welded profiles of the Strong, Lord or Barcode type, pipe profiles from the Bambus range and other fillers to the customers specifications. The general rule is that the width of each gate wing is 2.5 times the height of the gate wing. Gates are equipped with high quality mechanisms - hinges, locks, stops and accessories. The gate wing can be opened to the left or right, inwards or outwards. You can choose to open the gate wing between 90 and 180 degrees.
It is possible to choose between standard hooks (door handle, door knob and triangular handle), electric lock or a lock in various colours with a selection of machining from the manufacturer's range. To open and close double-wing gates, it is possible to install an electric drive to the wing gate which is controlled remotely. In this case, the gate is not equipped with a lock and door handle.
Public areas and parks
|MATERIAL||Posts: powder coated hot-dip galvanized steel profiles
Gate frame: powder coated hot-dip galvanized steel profiles
Gate infill: steel wire, steel sheet, hollow or full steel profiles all galvanized and powder coated
|OPENING WIDTH (MM)||From 2000 to 6000, made-to-order|
|GATE HEIGHT (MM) - TOP LEAF EDGE||630 830 1030 1230 1430 1530 1630 1730 1830, 2030 2230 2430
Other heights made-to-order
|POSTS (MM)||Profiles 60 x 60, 80 x 80, 100 x 100, 150 x 150, dependent on gate height|
|TYPES OF INFILL||Mesh panels 3D, 2D, perforated sheet metal, slats, welded profiles of type Strong, Lord, Tube, Bambus and Visio range Other types of infill made-to-order|
|LOCK||Standard stainless mechanism / aluminium housing, 3 keys, stainless keep
Electric lock stainless mechanism / aluminium housing, stainless keep Electric keep
|COLORS||RAL 6005, RAL 7016, RAL 7035, RAL 7040|