SLIDING CANTILEVER GATES
Solid, safe, aesthetically pleasing gates which, when opened, allow completely free access without any guides or rails with a bright opening. Most customers seek a sturdy and reliable construction, easy operation and maintenance, consistent design, long-term warranty, easy and quick opening and closing operation. Self-supporting gates offer all these qualities which are amongst the most common choices for both residential and business clients.
Public areas and parks
Schools and kindergartens
The key advantage of the self-supporting gate is the mode of operation. Using a carrier mechanism, they slide above the ground, closing and opening the entrance. Opening for the self-supporting gate is only necessary in the doorway. The gate can be closed manually or through an electric motor drive. In the case of manual closing, a lock with a handle is inserted into the gate and special fittings for the in-line gate are attached to the end pillar.
The Self-supporting in-line gate consists of two (2) guiding pillars on one side, a gate wing, a catching pillar on other side, a carrier mechanism with trolleys that allow smooth and easy movement of the gate, rollers on the pillar and gate catchers on the catch pillar.
The Self-supporting gate needs a foundation of suitable dimensions, depending on the load capacity of the ground and length of the gate.
Public areas and parks
|MATERIAL||Posts: powder coated hot-dip galvanized steel profiles
Gate frame: powder coated hot-dip galvanized steel profiles
Gate infill: steel wire, steel sheet, hollow or full steel profiles all galvanized and powder coated
|OPENING WIDTH (MM)||From 3000 to 8000, standard in steps 500, other lengths made-to-order|
|GATE HEIGHT (MM) - TOP LEAF EDGE||630 830 1030 1230 1430 1530 1630 1730 1830 2030 2230 2430
Other heights made-to-order
|POSTS (MM)||100 x 100, 150 x 150 steel profiles, dependent on gate height and length|
|TYPES OF INFILL||Mesh panels 3D, 2D, perforated sheet metal, slats, welded profiles of type Strong, Lord, Tube, Bambus and Visio range Other types of infill made-to-order|
|LOCK||Installed only when gate will be manually operated, externally mounted stainless steel mechanism and aluminium casing lock with handle||COLORS||RAL 6005, RAL 7016, RAL 7035, RAL 7040|